Turn-Mill Machining

Turn-Mill Machining for Parts with Turned and Milled Features

Turn-mill machining is suitable for components that combine turned diameters, bores, flats, slots, cross holes, radial holes, threaded features, wrench faces, grooves, and multi-side details. Where possible, related features are completed in one setup to reduce accumulated error and protect datum relationships.

Turn-Mill Machining Range

Turn-mill work is reviewed against the part's rotational and side features. Turning diameter up to Ø680 mm and machining length up to 1,000 mm are independent maximum limits, subject to setup and tool access.

Review equipment and machining limits

Best-Fit Parts

  • Shafts with flats, slots or radial holes
  • Sleeves with cross holes or side features
  • Flanged components with bolt patterns
  • Threaded adapters with wrench faces
  • Fittings with ports or cross holes
  • Bushings with keyways or slots
  • Complex rotational components with turned and milled features

Typical Turn-Mill Features

  • Turned OD and ID features
  • Bores and counterbores
  • Cross holes and radial holes
  • Milled flats and wrench faces
  • Slots and lightening features
  • Bolt patterns
  • Side threaded holes
  • Grooves and reliefs
  • Face features and alignment surfaces
  • Deburring around intersecting features

Why One Setup Matters

When turned and milled features are related, moving the part between separate machines can introduce accumulated error. Turn-mill machining can reduce handling and help protect relationships between diameters, bores, flats, side holes, bolt patterns and mating faces.

One setup is not automatically required for every part. We review the drawing to decide whether the feature relationships, tolerances and quantity justify turn-mill machining.

Typical reason to use turn-mill

Use turn-mill when a rotational part also needs controlled flats, cross holes, ports, slots, side threads, or bolt patterns that relate to the turned datums.

Datum Relationship and Accumulated Error

Bore to Side Hole

Cross holes and ports may need to relate to the central bore, OD, shoulder or end face.

Flat to Thread

Wrench flats and threaded features may need consistent angular and axial position.

Bolt Pattern to Bore

Flanged components often require the central bore, bolt pattern, and sealing face to be reviewed together.

Slot to Shoulder

Slots, keyways and grooves may need controlled distance from a functional datum surface.

Mating Face to Rotational Datum

Assembly fit can depend on face quality, perpendicularity, bore condition, and burr control.

Inspection Method

We check how related features will be measured before committing to a machining plan.

Manufacturing Concerns

  • Workholding for multi-side features
  • Tool access for side holes and slots
  • Burrs at intersecting holes
  • Angular position of flats or ports
  • Thread starts and reliefs
  • Thin-wall deformation
  • Surface treatment allowance
  • Inspection access for related datums

Inspection Focus

  • Bore and OD dimensions
  • Feature position relative to datums
  • Cross-hole and port condition
  • Thread fit
  • Bolt pattern location
  • Sealing or mating face quality
  • Runout and coaxiality when specified
  • Burr check at intersecting features

Project details to include

  • 2D drawing and/or 3D model
  • Material grade
  • Quantity
  • Tolerance and datum notes
  • Thread standard and depth
  • Angular position requirements
  • Surface finish and treatment
  • Areas where burrs cannot be accepted
  • Assembly or mating-part notes

Request a quotation for your part

See the RFQ process

Request a Quote

Related Components

Custom CNC machined shaft with stepped diameters and threaded features

CNC Machined Shafts

Stepped diameters, grooves, threads, shoulders, cross holes, and controlled mating surfaces.

View details
Machined sleeve and bushing component with bore and chamfer details

Sleeves & Bushings

Bore control, OD/ID relationship, end-face quality, chamfering, cross holes, and deburring.

View details
CNC machined flanged component with central bore and bolt pattern

Flanged Components

Central bores, bolt hole position, face quality, sealing surface control, and datum understanding.

View details
Threaded CNC machined component with controlled thread and burr areas

Threaded Components

Internal and external threads, thread depth, entrance chamfer, burr control, and gauge inspection.

View details

Related Manufacturing Case

Review a real DXSCNC turn-mill component using customer-approved public photos. The case focuses on visible geometry, radial side-feature burr-control risk, finished-surface protection and manufacturing considerations without exposing confidential customer data.

Threaded turn-mill component with radial cross holes

See the real finished-part photos, evidence limits and buyer review points.

Turn-mill machining case study

Related Brass Turn-Mill Case

Review a real DXSCNC brass turn-mill component case using customer-approved public finished-part photos. The case focuses on strict geometric tolerance review, CMM inspection planning, anti-oxidation treatment and individual packing protection.

Brass turn-mill component with CMM inspection

See the public project facts, finished-part photos and buyer review points.

Brass turn-mill case study

Related Black POM Turn-Mill Production Example

Review a real DXSCNC production example for a 500-piece black POM long cylindrical mounting component. The page focuses on M15 end threads, milled side features, cross holes, counterbores, positional relationships and controlled plastic machining risks.

Black POM long cylindrical component

See real DXSCNC product photos and the public engineering review points for this drawing-based component.

View POM production example

Feature Position Accuracy in Turn-Milled Parts

Read the engineering guide to cylindrical datums, angular positioning, cross-hole and counterbore relationships, POM workholding and inspection planning for position-sensitive turn-milled components.

Technical Note

The guide uses this black POM production example to separate confirmed project facts from general machining guidance.

Read feature-position guide

FAQ

When should I choose turn-mill machining?

Choose turn-mill machining when turned diameters and milled features have functional relationships or when reducing handling can reduce risk.

Can turn-mill parts include cross holes?

Yes. Cross holes, radial holes, ports and side threaded holes are common reasons to review a part for turn-mill machining.

Does one setup always reduce cost?

Not always. We compare feature risk, quantity, tolerance requirements and setup complexity before recommending the process.

What drawings help most?

A 2D drawing with datum, tolerance, thread and surface finish notes plus a 3D model gives the clearest review path.

Related Engineering Notes

Review how side features, intersecting holes and datum relationships affect process selection and inspection planning.

Precision and surface requirements

Standard dimensional tolerance is ±0.01 mm. Tight tolerance down to ±0.005 mm is subject to drawing, geometry and process evaluation. Standard surface roughness is typically Ra 0.8 μm. Finer finishes, down to Ra 0.2 μm, can be evaluated for specific features depending on the machining process, grinding requirements and inspection criteria.

Projects beyond the overall machining range are individually assessed based on equipment, material, geometry and process.

6061 aluminum turn-mill production example

See a confirmed 20,000-piece precision serrated flange ring case made directly on CNC turn-mill equipment, with natural anodizing and a central bore tolerance of ±0.02 mm.

Read the 6061 flange ring case

316L multi-port turn-mill product

A real DXSCNC 316L flange demonstrates the coordinated machining of cylindrical surfaces, central threads, a circumferential hole pattern and radial connections.

View the 316L product

Perforated sleeve-type component example

Review a 304 stainless steel cylindrical example requiring turning, radial drilling and milled end features, with grinding considered only where the drawing requires it.

View the 304 sleeve example

7075 aluminum turn-mill product

See a black anodized 7075 component with milled windows and slots; 7050 is a separate material option.

View the 7075 aluminum product
Request a Quote