Component-Specific CNC Machining

Machined Sleeves and Bushings: Selection and Fit Review

Use this page to choose a sleeve or bushing review path. Start with the part's function and mating interface, then identify which bore, outside diameter and end face control assembly.

Machining Range

DXSCNC focuses on small to mid-size precision turned and turn-mill components.

Max turning diameterUp to 680 mm
Max machining lengthUp to 1000 mm

Dimensional capability: DXSCNC's ordinary dimensional tolerance is ±0.01 mm. Tighter feature requirements are evaluated for the project. Dimensions without individual tolerances follow the general tolerance standard on the customer's drawing or the project agreement.

Tolerance feasibility depends on material, geometry, part size, wall thickness, surface treatment, workholding and inspection method. Include the drawing, material requirements and quantities in your RFQ. If technical details need clarification, our team will contact you directly.

Drawing Details for Quotation

DXSCNC reviews drawing-based sleeves and bushings for CNC turning and, where side features are present, turn-mill machining. The review covers bore and OD requirements, wall thickness, end faces, chamfers, threads and burr-sensitive intersections.

The detailed part pages separate sleeve geometry and thin-wall concerns from bushing fit and bore-to-OD relationships. State material condition, finishing requirements and whether acceptance dimensions apply before or after treatment.

Typical Part Types

  • Precision sleeves
  • Spacer sleeves
  • Guide bushings
  • Threaded sleeves
  • Thin-wall bushings
  • Flanged bushings
  • Sleeves with cross holes
  • Brass, bronze or stainless bushings

Common Materials

304 and 316 stainless steel for corrosion-resistant sleeves and fittings.

6061 and 6082 aluminum for lightweight spacers and UAV-related sleeves.

Brass, bronze and copper alloys for bushings, adapters and fluid-control parts.

Carbon steel, alloy steel and engineering plastics when strength, wear or low-friction behavior is required.

Critical Features

  • Bore size and bore condition
  • OD/ID relationship
  • Wall thickness and roundness
  • End-face quality and perpendicularity where specified
  • Chamfers and lead-in details
  • Cross holes, grooves and slots
  • Internal or external threads
  • Burr-free bore and hole intersections

Manufacturing considerations

For drawing-based parts, the same nominal feature can have different manufacturing risk depending on datum references, tolerance, material, quantity and final assembly requirements.

Precision Focus

For sleeves and bushings, precision control often focuses on bore size, OD/ID relationship, wall thickness, end-face condition and assembly fit. Tight bore or mating features should be clearly marked on the drawing.

Manufacturing Risks

Risk 1

Thin-wall sleeves can deform during clamping or after material removal.

Risk 2

Cross-hole exits inside a bore can leave burrs that affect fit.

Risk 3

Surface treatment can change bore size or hide burrs if not planned.

Risk 4

Bore-to-OD relationships require clear datum and inspection planning.

Risk 5

Soft materials such as brass or plastics need controlled clamping to avoid marks or distortion.

Inspection Focus

  • Bore measurement
  • OD and wall-thickness checks
  • End-face and length checks
  • Thread fit checks where required
  • Visual bore condition and burr inspection
  • Runout or coaxiality checks when specified

Surface Treatment Considerations

Sleeves and bushings may require anodizing, passivation, plating, black oxide, oiling or no finish depending on function. For bushings, clarify whether the bore must be protected during treatment and whether final dimensions apply after finishing.

Surface treatment can affect final dimensions, thread fit, cosmetic appearance, corrosion resistance and packing requirements. Please identify surfaces that must remain protected, masked, untreated or measured after finishing.

Finishing notes to provide

  • Anodizing, plating, passivation, black oxide or other finish
  • Color or appearance requirement if relevant
  • Masking requirement for bores, threads or sealing faces
  • Dimensions required before or after treatment
  • Packing sensitivity for finished surfaces

Project details to include

  • 2D drawing and/or 3D model
  • Material grade and equivalent standard
  • Quantity and expected repeat demand
  • Surface treatment or heat treatment
  • Critical tolerances and datum references
  • Thread standard, fit and depth
  • Surface finish requirements
  • Burr-free or sealing-face areas
  • Application or assembly notes
  • Target delivery date

Request a quotation for your part

Request a Quote

Related Capabilities

Choose a Detailed Part Review

Engineering Notes for Your Drawing

Related Materials

Related Applications

Related Brass Threaded Sleeve Production Example

Review a DXSCNC-owned brass threaded sleeve production example with mirror-polished surface, internal thread review, bore finish, burr-control concerns and packing-protection notes. Customer identity, drawing number and order value are not published.

Mirror polished brass threaded sleeve

See real DXSCNC product photos and buyer review points for similar drawing-based brass sleeves.

View production example

Related Black POM Turn-Mill Production Example

Review a real DXSCNC production example for a 500-piece black POM long cylindrical mounting component. The page focuses on M15 end threads, milled side features, cross holes, counterbores, positional relationships and controlled plastic machining risks.

Black POM long cylindrical component

See real DXSCNC product photos and the public engineering review points for this drawing-based component.

View POM production example

FAQ

Which page should I use for a sleeve or bushing RFQ?

Use this category page to select the review path. The sleeve page focuses on geometry, wall thickness and end-face requirements; the bushing page focuses on fit, bore-to-OD relationships and acceptance conditions.

What bore information is useful for quotation?

Provide the bore tolerance, surface finish, mating-part notes, datum references, chamfers and burr-sensitive areas. State whether inspection dimensions apply before or after finishing.

Can thin-wall sleeves be reviewed?

Yes. Suitability depends on material, wall thickness, clamping, machining sequence and inspection conditions. The drawing is needed to evaluate deformation risk; this page does not publish a measured deformation result.

When do cross holes require additional review?

Cross holes, slots or side threads require review of feature position, tool access and burrs at intersections with the bore. Include orientation and internal-edge acceptance requirements where relevant.

Related Sleeve and Bushing Examples

These manufacturing-consideration examples connect bore condition, OD relationship, thread fit, edge condition and mating requirements to inspection planning.

Related Engineering Notes

Review bore control, chamfer details and assembly-fit considerations for sleeves and bushings.

304 stainless steel perforated sleeve example

Explore a long sleeve-type design with a stepped bore, radial holes and end features. The two supplied images are enhanced visualizations, not original production photographs.

View the 304 sleeve example
Request a Quote