Real Manufacturing Case

Turn-Mill Shaft with Cross Holes: CNC Machining Case Study

A real DXSCNC manufacturing example using customer-approved public photographs. Customer identity, drawing number, order information and confidential dimensions are removed.

Case Overview

This case study is based on real DXSCNC project photos and project data approved for website publication. The page documents visible manufacturing evidence and practical review points for a 6082 aluminum turn-mill shaft-type component with threaded, mating and side-feature areas.

Customer name, drawing number, purchase-order information and other confidential project records are not published. Public project data is limited to material, quantity, approximate size, surface appearance and the manufacturing review points shown below.

Finished component overview supplied by DXSCNC. Customer identity, drawing number and dimensions are not shown.

Project Information

Component categoryTurn-mill shaft / rotational component
Material6082 aluminum alloy
Quantity1,100 pcs
Approximate size rangeDiameter 185 mm x length 385 mm
ProcessCNC turning + turn-mill machining review
Critical featuresOD, shoulders, cross-hole or side-feature areas, threaded or mating features as defined by the drawing
Surface appearanceBlack surface finish; exact treatment specification is not stated here
Inspection focusOD size, shoulder position, cross-hole or side-feature burr condition, runout/coaxiality if specified
Packing reviewExport protection considered; actual packing method not published

Real Project Photos

The following photos are the available public evidence for this case. Raw material, machine setup, in-process machining, inspection and packing photos were not provided, so this page does not present substitute images for those stages.

Finished component overview supplied by DXSCNC. Customer identity, drawing number and dimensions are not shown.
Threaded-end view showing the internal opening and flange geometry for drawing-based review.
Angled finished-part view showing side features and functional edge areas where burr control must be reviewed.
Finished-part angle showing the black surface finish and assembly-sensitive edges.
Visible in the photographsBlack finished surfaces, threaded end and side-feature geometry
Supplied public project factsMaterial, quantity and approximate size are supplied project information, not measurements inferred from photos
Not publishedBatch inspection records, measured tolerances, fixture details, yield and customer acceptance records

Manufacturing Challenge

  • Maintaining the datum relationship between turned features and side machined features
  • Controlling burrs around cross holes, slots or side-feature edges defined by the drawing
  • Avoiding surface damage after machining and finishing
  • Protecting threaded, mating and visible finished surfaces
  • Checking critical dimensions and visual condition before packing

Manufacturing considerations

The public photos show finished geometry only. The actual risk level depends on the controlled drawing, material, tolerance, workholding method, surface treatment and inspection method.

Process Review for Similar Parts

This is a manufacturing-planning example for comparable components, not a released routing or setup record for the photographed batch. Machine selection, fixture method, setup count and operation sequence are not inferred from the finished-part photos.

Manufacturing planning

Identify material, datum references, critical ODs, threads, side features, burr-free areas, finish notes and inspection requirements.

Process planning

Review how turned features and side machined features relate before confirming workholding and tool access.

CNC turning

Review rotational features such as OD, shoulders, internal openings and threaded or mating areas according to the drawing.

Turn-mill operation

Review side features, cross holes, slots or related machined areas together with datum and burr-control requirements.

Deburring

Define accessible edges and burr-sensitive areas before production when assembly or sealing may be affected.

Inspection

Agree critical features, thread or mating requirements, visual condition and burr-control acceptance methods before manufacture.

Cleaning and packing

Define cleaning and surface separation needs to reduce collision, thread damage and surface marks during export handling.

Tolerance Review for Similar Parts

DXSCNC's ordinary dimensional tolerance is ±0.01 mm. Tighter feature requirements are evaluated for the project. Dimensions without individual tolerances follow the general tolerance standard on the customer's drawing or the project agreement.

This is a manufacturing consideration for similar parts, not a measured result for the production batch described above.

Cross-Hole and Burr-Control Approach

For turn-mill shaft components with cross holes, slots or side features, burr control must be reviewed before production. The most important locations are usually thread starts, hole entrances, hole exits, internal intersections, mating faces and surfaces handled during assembly.

Buyers should mark burr-free requirements clearly on the drawing. If internal intersections or cosmetic finished areas matter, the RFQ should state the acceptance method instead of relying on a general note.

Buyer notes to define

  • Burr-free zones
  • Thread standards
  • Side-feature position
  • Hole-to-bore relationship
  • Permitted edge break
  • Inspection method

Inspection Approach

The project-specific inspection report is not published. For comparable components, inspection may include calipers or micrometers for suitable external dimensions, thread gauges if threads are specified, height gauge or CMM review if positional requirements apply, and visual checks for burrs, scratches and dents.

Before packing, DXSCNC reviews the agreed critical-feature checklist according to the drawing and RFQ notes.

Inspection items to confirm

  • OD and shoulder dimensions
  • Thread or mating feature requirements
  • Cross-hole or side-feature burr condition
  • Runout or coaxiality if specified
  • Finished-surface visual condition

Surface Finish Review

The public photographs show a black surface finish on the 6082 aluminum component. The exact treatment specification is not established by the photographs and is not stated here. For a similar RFQ, provide the treatment type, coating allowance, masking and acceptance requirements instead of relying on color alone.

Finish planning should identify whether critical dimensions apply before or after treatment. Surface protection and part separation should be reviewed with the finished-surface requirement.

Packing and Export Protection

For comparable parts, the packing review should define cleaning, protection of sharp or functional surfaces and separation to reduce collision risk. Weight, finish condition, thread sensitivity and export handling requirements inform that review.

No packing photo or case-specific packing method is published for this project. These are review considerations, not a record of the actual packing sequence.

Published Outcome and Evidence Limits

The public record documents a black-finished 6082 aluminum turn-mill component through approved project information and finished-part views. It supports discussion of geometry, datum relationships, burr-sensitive features and surface protection.

Batch inspection results, yield, delivery performance and customer acceptance records are not published. The photographs do not establish measured tolerances or acceptance of every feature.

Engineering Takeaway

For turn-mill shafts with cross holes or side features, buyers should clearly mark datum references, critical ODs, cross-hole or side-feature position, burr requirements, runout/coaxiality requirements and inspection methods on the drawing.

Useful RFQ package

  • 2D drawing and 3D model
  • Material grade
  • Quantity
  • Surface treatment
  • Critical tolerances
  • Thread standards
  • Burr-free areas
  • Target delivery date

Confidentiality Statement

This case study is based on a real DXSCNC manufacturing project. Customer name, drawing number, purchase-order information and confidential dimensions have been removed. Customer drawings and technical files are used only for RFQ review, manufacturing communication and inspection planning.

Related Pages

Request a Quote

Ready to review a similar CNC turned or turn-mill shaft project?

Send drawings, material, quantity, tolerance requirements, surface treatment and target delivery date.

Request a quotation for your part

See the RFQ process

Request a Quote
Request a Quote