Technical Notes / Engineering Guide

Engineering Guide: Bore-to-OD Concentricity in Precision Bushings

Specify and inspect the bore-to-OD relationship in a CNC-machined bushing, including thin-wall distortion and press-fit effects.

Identify what locates the bushing

Distinguish the press-fit OD from the running bore. If the running axis must follow the housing seat, specify the controlled relationship and datum. Independent diameter measurements alone do not establish alignment.

Control distortion before final sizing

Where feasible, finish the bore and the OD from a common reference. For thin walls, evaluate contact area and clamping pressure. Compare readings while restrained and after release to identify springback before setting the finish cut.

Agree on free-state and installed checks

Use the specified datum setup for runout or geometric checks and take bore readings at multiple angles and depths when taper or ovality matters. If a press fit changes the bore, agree whether the final acceptance check is free-state, installed or both.

Related engineering resources

See the RFQ process

Request a Quote
Request a Quote