Technical Notes / Engineering Guide
Engineering Guide: CNC Machining of Aluminum Spacers for UAV Applications
Specify stack height, seating faces, bore fit and finish for a drawing-based aluminum spacer used in a UAV assembly.
Start with the stack-up
Identify whether the spacer sets the gap, carries clamp load or locates another part. Define length, bore fit and seating-face relationship from that function. The equipment designer specifies the alloy, condition, loading and acceptance requirements.
Choose a process that protects the seating faces
Turning suits a coaxial bore and OD. Evaluate turn-mill when a flat or cross hole must relate to the bore. For a thin wall, consider softer jaws or an alternate grip and recheck size after release.
Check the part in its final state
Specify which surfaces are measured after anodizing or other finishing. Protect the seating interface from raised burrs and handling marks. Include assembly drawings or a stack-up note so the required seating contact is clear.